background image

-      - 

34

 

GUARANTEE 

 

 

GUARANTEE CONDITIONS   

All DELTA OHM instruments have been subjected to strict tests and are guaranteed for 24 months from 
date of purchase. DELTA OHM will repair or replace free of charge any parts which it considers to be 
inefficient within the guarantee period. Complete replacement is excluded and no request of damages are 
recognized. The guarantee does not include accidental breakages due to transport, neglect, incorrect use, 
incorrect connection to voltage different from the contemplated for the instrument. Furthermore the 
guarantee is not valid if the instrument has been repaired or tampered by unauthorized third parties. The 
instrument has to be sent to the retailer without transport charge. For all disputes the competent court is 
the Court of Padua.  

 

The electric and electronic devices with the following symbol cannot be disposed in the public 
dumps. According to the Directive UE 2002/96/EC, the European users of electric and electronic 
devices are allowed to give back to the Distributor or Manufacturer the used device at the time of 
purchasing a new one. The illegal disposing of electric and electronic devices is punished by a 
pecuniary administrative penalty. 

 
This guarantee must be sent together with the instrument to our service centre.  
N.B.: Guarantee is valid only if coupon has been correctly filled in all details. 
  

Instrument type 

‰

 

HD2303.0 

 

Serial number

 

 

 

RENEWALS 

 

 

Date  

Date 

Inspector  

Inspector 

Date  

Date 

Inspector  

Inspector 

Date  

Date 

Inspector  

Inspector 

 

 

 

C E   C O N F O R M I T Y  

Safety

EN61000-4-2, EN61010-1 LEVEL 3 

Electrostatic discharge 

EN61000-4-2 LEVEL 3 

Electric fast transients 

EN61000-4-4 LEVEL 3 

Voltage variations 

EN61000-4-11 

Electromagnetic interference susceptibility 

IEC1000-4-3 

Electromagnetic interference emission 

EN55020 class B 

 

 

 

Содержание HD2303.0



































Отзывы: