Delta OHM HD2205.2, Руководство пользователя

Страница: 11 / 80

- - 11
Bottom line
The following is reported in the bottom line:
8.
Identifier of the sample being measured : The automatically increased progressive number
associated with the PRINT and MEM functions. The identifier is indicated in the printout and
in the recorded samples together with the date, time and measured values.
To set the number associated to the first sample, press
ID , then use the and arrows to se-
lect the desired number: Confirm by pressing ENTER. This parameter can be modified only by
the administrator (see page 21).
If the
EPT option is set to DIR (see point 6 in this chapter), each time the PRINT or MEM key
is pressed, the identification ID is increased by 1.
If the EPT option is set to Auto , Man or Time , pressing PRINT only causes the print to occur
when the measurement has stabilized (EPT symbol still); until the measurement is frozen, it is
possible to repeat the print at will, but the sample identifier number is not increased. This is
useful when more labels concerning a single measurement must be printed with the same iden-
tification code, without increasing the code each time.
9. MEM reports the number of samples contained in the instrument’s memory.
10. Current date expressed as year/month/day.
11. Current time expressed as hours/minutes/seconds.