- -
46
Connection to a PC
The instrument is provided with a multistandard port with 8-pole MiniDin connector, for connection
to a PC.
Optionally, you can receive on request:
•
serial connection cable RS232C with 8-pole MiniDin and sub D 9-pole female connectors (code
HD2110 CSNM
).
•
USB2.0 connection cable with 8-pole MiniDin and USB type A connectors (code
HD2101/USB
).
The Bluetooth
HD22BT
module, directly installed by Delta Ohm, is also available. This module
allows wireless connection of the instrument to a PC fitted with a Bluetooth HD USB.KL1, to a
Bluetooth HD40.2 printer, or to a PC with built-in Bluetooth interface.
The HD 98569 is supplied with
DeltaLog11 software
(vers. 2.0 and later)
.
The software manages
the connection, data transfer, graphic presentation, and printing operations of the captured or
logged measurements.
The DeltaLog11 software is complete with "On-line Help" (also in PDF format) describing its
characteristics and functions.
The instruments are also compatible with the
HyperTerminal
communication program supplied
with the Windows operating systems (from Windows 98 to Windows XP).
C
ONNECTION TO THE
RS232C
SERIAL PORT
1. The measuring instrument has to be switched off.
2. Using the Delta Ohm “HD2110 CSNM” serial cable, connect the measurement instrument to the
first free serial port (COM) of the PC.
3. Turn on the instrument and set the baud rate to 38400 (MENU >> SYSTEM PARAMETERS >>
“RS232 Baud_Rate”, select 38400 using the arrows >> confirm with ENTER). The parameter
remains in the memory.
4. Launch the DeltaLog11 application and press CONNECT. Wait for the connection to occur and
follow the indications on the screen. For a description of the DeltaLog11 application, please
refer to its on-line Help.
C
ONNECTION TO THE
USB
2.0
PORT
The USB connection requires the installation of the drivers
. They are contained in the
DeltaLog11 CD-Rom.
In the Documentation section of the DeltaLog11 CD-Rom, a complete driver installation guide in
PDF format is available.
It is recommended to print this guide version and follow it exactly.
Proceed as follows:
1.
Do not connect the instrument to the USB port until you are expressly requested to do
it.
2.
Insert the DeltaLog11 CD-Rom (vers. 2.0 and later) and select the "Install/Remove USB
driver" item.
3.
The application checks the presence of the drivers on the PC: The installation starts if they
are not present; if they are already installed, the drivers are removed by pressing the key.
4.
The installation wizard prompts the software user license: To proceed,
the
software usage
terms must be accepted - click on YES
.
5.
On the next page the folder where the drivers will be installed is indicated: Confirm without
modifying.
