VIVOTEK
User's Manual - 55
System > Logs
This section explains how to configure the Network Camera to send the system log to a remote
server as backup.
Log server settings
Follow the steps below to set up the remote log:
1. Select
Enable remote log
.
2. In the IP address text box, enter the IP address of the remote server.
2. In the port text box, enter the port number of the remote server.
3. When completed, click
Save
to enable the setting.
You can configure the Network Camera to send the system log file to a remote server as a log backup.
Before utilizing this feature, it is suggested that the user install a log-recording tool to receive system log
messages from the Network Camera. An example is Kiwi Syslog Daemon. Visit
http://www.kiwisyslog.
com/kiwi-syslog-daemon-overview/
.
This column displays the system log in a chronological order. The system log is stored in the Network
Camera’s buffer area and will be overwritten when reaching a certain limit.
System log
Содержание VIVOTEK CU9171
Страница 7: ...VIVOTEK User s Manual 7 24 18 CU9171 H CU9183 H Pinhole ...
Страница 12: ...VIVOTEK 12 User s Manual A 2 Route the module cable A A1 A 1 Insert the lens module into the clamp bracket ...
Страница 14: ...VIVOTEK 14 User s Manual CU9183 H 93º The same applies to the pinhole lens ...
Страница 93: ...VIVOTEK User s Manual 93 ...