Delta Elektronika ES 030-10, Руководство пользователя

Страница: 7 / 13

GENERAL ES300
7 / 13 DELTA ELEKTRONIKA B.V. rev. Sept. 2019
2.25 SERIES OPERATION

Series operation is allowed up to 600V total voltage. The
power supplies can be connected in series without special
precautions.
2.26 PARALLEL OPERATION

Paralleling of the units has no limitations. The power supplies
can be connected in parallel without special precautions.
2.27 MASTER / SLAVE OPERATION

For easier control, Master / Slave operation is recommended
(see fig. 2 - 13 and - 14). The resulting combination behaves
like one power supply and can be programmed on the master.

M/S series operation is allowed up to 600V total voltage.

The power supplies must be connected with the MASTER /
SLAVE SERIES ADAPTER. The master controls one slave,
which in its turn controls the second slave and so on. The
result is true voltage sharing.

For M/S parallel operation connections can easily be made on
the analog programming connector. The master controls all
slaves.

The result is true current sharing.

Mixed M/S parallel - series operation is also possible (see fig.
2 - 15).

Fig. 2 - 16 shows a computer controlled M/S parallel
combination.

Note: M/S parallel operation is not recommended for more
than 4 units, consult factory for a solution.
2.28 POTENTIOMETERS

CV and CC potentiometers with knobs at front panel.