Delta Electronics 33W Family, Техническое описание

Страница: 8 / 13

DS_S48SA1R812_06012006
[ ]
ΚΩ −
∆
= −
104
% Vo
up
− ∆ +
1089 %) 100 ( 8 . 23 Vo
Ex. When trim-up +10% (1.8V X 1.1 = 1.98V)
Rtrim
[ ]
ΚΩ = − = −
9 . 48 104
10
up
− +
1089 ) 10 100 ( 8 . 23
are should be taken to ensure that the maximum
utput Voltage Adjustment (TRIM)
o increase or decrease the output voltage set point, the
Rtrim
C
output power of the module remains at or below the
maximum rated power.
O
T
modules may be connected with an external resistor
between the TRIM pin and either the Vo+ or Vo -. The
TRIM pin should be left open if this feature is not used.
Figure 15:
Circuit configuration for trim-down (decrease output
the external resistor is connected between the TRIM
voltage)
If
and Vo- pins, the output voltage set point decreases.
The external resistor value required to obtain a
percentage of output voltage change
△
Vo% is defined
as:
[ ]
ΚΩ −
∆
= −
104
% Vo
down
1089
x. When trim-down –10% (1.8V X 0.9 = 1.62V)
Rtrim
E
[ ]
ΚΩ = − = −
9 . 4 104
10
down
1089
Rtrim
Figure 16:
Circuit configuration for trim-up (increase output
the external resistor is connected between the TRIM
voltage)
If
and Vo+ the output voltage set point increases. The
external resistor value required to obtain a percentage
output voltage change
△
Vo% is defined as:
8