DELTA DORE 6413255, Руководство пользователя

Страница: 7 / 10

EN
- 14 -
- 15 -
7. Associate the and buttons for 1 control system
receiver
3
OK
1 2
>5s
or
>3s
OFF
OFF
>5s >5s
Example
Ì
Check that the
receiver has
acknowledged the
request
(refer to the guide).
On the keypad, the
LED flashes r ed
( button) then
green.
Press then or
8. Configure the alarm and control system access codes
Ê
Enter your access code (1234 by default)
Ë
On the keypad, press the button for 5 seconds.
The red LED ( button) will come on.
Ì
Enter the new access code (4 digits), then press .
The green LED comes on for 3 seconds, then red.
To confirm and exit the mode, press the button, for 5
seconds.
Alarm access code:
• Upon activation, the installer code is
,
• To create, modify or delete an access code,
refer to the system installation guide
Control system access code:
• Upon activation, the user code is ,
• To change the default access code or create
a new access code:
The CLE 8000 TYXAL+ uses 2 types of access code:
You can create up to 9 different control system access codes.
Beyond this input is refused and the keypad emits aseries of
beeps.
• To create, modify or delete an access code
(installer or user),refer to the system installation guide.
Your CLE 8000 TYXAL + is compatible with Tydom,
to automate your Smart Home.