background image

EN

- 10 -

- 11 -

1. Presentation

2. Location

CLE 8000  TYXAL+ is an outdoor keypad that can be associated with a DELTA 
DORE X3D wireless alarm system and/or an X3D control system receiver.

Before using your keypad, if you want to:

A) Control the alarm, you must associate the keypad with the alarm system: 
     Read system installation guide

B) Control the control systems:

Ê 

Select the operating mode: 

, or 

 

Ë 

Associate the control system receivers. 

Ì 

Create the 4-digit access codes to be able to control them.

Ë 

Glue the seal to the rear panel of 

the base.

3. Mounting

1

3

4

C

V2

V1

D2

D1

1

2

3

2

The radio range between the CLE 8000 TYXAL+ (outdoors) and the CS 8000 
TYXAL+ (indoors), or the control system receiver, depends on the environment 
and installation conditions.
The installation mounting can affect the radio range. The keypad must not be 
mounted on a metal surface, otherwise the range will be affected.
The average range is 20 m. It will be optimised if the device is mounted at 

height (e.g. 1.50 m from the floor). 

1

2

Lithium battery - AA

LS 14500 3,6 V

3

4

1

2

3. Mounting

Ì 

Mark and drill holes D1, D2.

Ì 

Mount the base using screws V1, V2.

1

3

4

C

V2

V1

D2

D1

1

2

3

2

1

3

4

C

V2

V1

D2

D1

1

2

3

2

Ø max = 3 mm

4. Activation

Ê 

Fit the battery, observing 

the right polarity.

Ë 

Close and lock the unit.

1

2

Lithium battery - AA

LS 14500 3,6 V

3

4

1

2

• Association with an alarm system
• Selection of triggering method
• Test

Read system installation 
guide

5. Operation with an alarm system 

Содержание 6413255











Отзывы: