Delta Core GP8 Radio CPL, Руководство пользователя, Страница: 22 / 26

- 43 -
Turn the selector dial to , then hold down the 2 nd
button from the top for 5 seconds until tESt is
displayed.
The RF LED of the GP8 RADIO PLC must flash each
time a signal is received.
If this is the case, radio transmission is occurring
properly.
Turn the selector dial or press OK to exit tESt mode.
Otherwise, move your transmitter.
Wireless test
5
s econd s
- 42 -
The factory settings may be restored for each of the
menus.
Turn the dial to
, then press and hold the
i
button for
5 seconds.
Repeat these steps for the other menus.
To exit the mode, turn the selector dial to the right.
Restore factory settings
Pre ss a nd hold the bu tton
for the men u yo u w a nt to
re s et for 5 s econd s
(ex a mple s hown here
for men u 1)
Then pre ss OK
to confirm the re s et.
T u rn the di a l to the right
to exit the re s et.
or