Wireless/PLC association (menu R)
- 31 -
Transmitter
Association
To be associated zone by zone or
for all zones (rAd)
Press the button.
1
2
3
4
5
6
7
8
9
0
#
To be associated with all zones
(rAd)
Enter the first 4 numbers of the
access code (1234 by default),
then press the
button
for 5 seconds.
To be associated zone by zone
Simultaneously press and hold the
ON•and OFF buttons of the unit’s
control device for 5 seconds to switch
to maintenance mode.
Open up the control unit and press
“test”.
Close the control unit.
Door/window
opening detector
Window open:
heating in Frost Protection
mode
Telephone
transmitter
Remote control
of the installation
TYXAL
control unit
• Monitoring
alarm on: heating in
Economy mode
*
• Monitoring alarm off:
heating in Comfort mode
*
*
: until the next program
change
- 30 -
Step 2: Associating the home automation products.
The following menus are used to associate one or
more transmitters, either with all zones (rAd) or with
one zone (zone rAd 1, zone rAd 2 or zone rAd 3).
Select the zone to associate by pressing OK.
On the transmitter,
confirm the association as
indicated in the table or
refer to the user guide.
Each newly associated
transmitter is displayed on
the screen (number of
transmitters).
All zones
Number of associated transmitters
Zone 1
Number of associated transmitters