19
Phillips Screwdriver
Supplied
FF. 19 mm Screw x 8
From Step 2
W. Hamper Bottom x 1
Z. Caster x 4
Caster Wrench
Supplied
Z
Z
U
FF
FF
FF
FF
FF
! ENSURE 4 PER-DRILLED HOLES
FOR THE CASTERS OUTWARDS.
! ENSURE THE EDGE WITH 2
PER-DRILLED HOLESMUST FACE
THE BACK.
BOTTOM
BACK
Step 3
Section 3: Hamper Assembly
Parts and tools required to complete step.
1. Attach the Hamper Bottom (Part W) to the Assembly From Step 2 with (8) 19mm Screws (Part FF). Tighten with the
Phillips Screwdriver. The edge with (2) Pre-drilled holes must face the back.
2. Attach (4) Casters (Part Z) to the bottom in the threaded holes. Tighten with the Caster Wrench.
