Delta Children 27404 страница 6 Скачать руководство пользователя

Страница: 6 / 19

Customer Service

Tel. (800) 377-3777

www.deltachildren.com

ASSEMBLY

Fully Opened

Position

Back

Support Tube

PULL

ATTACHING SEAT PAD

First, press the top button on the front support

hub and pull apart the top support tubes until

they "click" into a fully opened and locked

position (Fig. 5).

Second, press the bottom button on the front

support hub and pull apart base tubes until

they "click" into a fully opened and locked

position (Fig. 6).

NOTE: Make sure all tubes are in a fully

locked position, pull outward on the support

tubes.

Position the seat pad so that the headrest is

toward the back support hub. (Fig.7)

Place the seat pad over the top support tubes

making sure the inside fabric seat zipper edge

is draped on the inside of the support tube

and the outside printed fabric seat zipper edge

is draped on the outside of the support tube.

(Fig.7A)

Make sure seat pad insert holes are aligned

with the plastic mobile arm housing on support

tubes.

Fig. 6

Fig. 7

Fig. 7A

Seat Pad

Over Top Support Tubes

Fig. 5

First, press top button

to open top

support tubes

Second, press bottom

button to open

base tubes

Mobile Arm

Insert Holes

Headrest

Top Support

Tube

Outside Printed

Fabric Seat

Outside Printed

Fabric Seat

Zipper Edge

Inside Fabric

Seat Zipper

Edge

Inside Fabric

Seat

OPENING INCLINE SLEEPER

Содержание 27404




















Результаты поиска

Содержание 27404

Отзывы:

Похожие инструкции для 27404

Бренды по названию

Популярные бренды

Delta Children 27404, Инструкция по эксплуатации

Результаты поиска

Содержание 27404

Отзывы:

Похожие инструкции для 27404

Бренды по названию

Популярные бренды