![DELSOL DSBQ25 Скачать руководство пользователя страница 19](http://html1.mh-extra.com/html/delsol/dsbq25/dsbq25_installation-use-and-care-manual_2471121019.webp)
14
OPERATING INSTRUCTIONS
–
DELSOL
G
AS
G
RILL
BEFORE LIGHTING THE GRILL
DO NOT ATTEMPT TO LIGHT THE GRILL IF YOU SMELL GAS.
WARNING! IT IS CRITICAL THAT THE GAS BURNERS ARE PROPERLY INSTALLED
WITH THEIR ORIFICES INSIDE THE BURNERS AIR SHUTTERS. If not properly
installed, gas may leak outside of the burner that could lead to fire, potential damage to your
grill, bodily injury or death.
Inspect the gas supply piping or hose prior to turning the gas ON. If there is evidence of cuts, wear,
or abrasion, it must be replaced prior to use. The replacement pressure regulator and hose assembly
must be the type specified by the manufacturer. Do not use the grill if the odor of gas is present. The
pressure regulator and hose assembly supplied with the units must be used.
If the unit is LP, screw the regulator and hand tighten to the valve of the cylinder and leak check the
hose and regulator connections with a soap and water solution before operating the grill. Reference
page 8 for leak test procedure.
Always keep your face and body as far away as possible when lighting.
Refer to spiders and insects warning and procedure under the cleaning and maintenance page of this
manual.
66
TO LIGHT THE GRILL BURNER
Lighting the Grill
1.
Open the grill hood completely. Do not attempt to light the
grill with the hood closed.
2.
Open the gas supply shut-off valve.
3.
To ignite burners, push the burner knob in and slowly rotate
counter clockwise to the high position.
4.
A loud click can be heard as the electronic lighter produces a
spark. Listen for the sound of the gas igniting and look for the
flame through the cooking grids. If the burner does not light on
the first try, repeat immediately.
For Rotisserie Lighting:
For rear burner, a slower turn of the knob
is necessary. This allows gas to accumulate in the rear burner to
achieve ignition.
CAUTION
: If ignition does not take place within 4 seconds, turn
knob to the OFF position, wait for five minutes and repeat step 3
and 4.
5.
Close the hood to allow the grill to pre-heat until the hood
thermometer displays the desired grilling temperature.
Warning
: If you smell gas, shutoff the gas supply and
immediately check for leaks using the soapy water technique.
(See Page 8)