LDB-1se User Manual
19
Set: Mods
(continued)
Select
Modify all instruments. Normally, only the instrument being edited is modified. To modify all
instruments in the pattern, hold the Select button while pressing a number button. This is not a toggle.
You must hold Select each time you wish to modify all instruments, otherwise only the current instrument
is modified.
In Pad Record mode, there is no single instrument being edited. Therefore, mods always affect all instru-
ments, and the Select button has no effect. Furthermore, if a multi-pattern song is playing, all patterns in
the song are modified.
In Trigger Edit mode, mods affect only the triggers, and the Select button has no effect.
Set: Length
Change the number of steps in a pattern. The LED corresponding to the current time scale blinks.
Num
Press a number button to set the length of the pattern being edited. If the pattern is playing, then
you will hear the change immediately, but the change will not be permanent until you release the Set
button. You can play with this behavior by shortening the pattern, but then setting it back to 16 before
releasing Set.
In Pad Record mode, the length of all patterns in a song are modified. If the song contains patterns with
different lengths, all of the corresponding LEDs will blink.
In Trigger Edit mode, Set Length affects only the current pattern if triggers are per-pattern, and affects all
patterns in the song if triggers are global.
Set: Clear
Clears all steps from the pattern or individual instruments. The bottom row of number LEDs indicates
those instruments which are used in the pattern being edited.
Num
Press a number button to clear all steps for the associated instrument.
Select
Clear all instruments.
In Pad Record mode, if a multi-pattern song is playing, all patterns in the song are cleared.
In Trigger Edit mode, the triggers are cleared immediately. Number buttons and Select are not used.
