Delphia 33, Руководство пользователя

Страница: 85 / 102

82/99
BILGE PUMP PANEL
Bilge pump:
-
-
-
-
( ) ,
o
-
( )
in order to check the bilge pump you should turn
the master house switc off and turn on the bilge
auto switch on the switchboard h
automatic mode turn on on the additional
panel photo on the right and then add some water
to the pump sens r to check if the pump starts
automatiacally.
manual mode turn manual mode on the additional
panel photo on the right and check if the pump works.
auto mode
SWITCHBOARD PANEL LIGHTING
Black button in a silver frame is used to turn on the
lighting of the markings on the switchboard panel,
bilge pump panel and
indicator DC/TLM .
CHARGING WITH QUICK
BATTERY CHARGER 50A-115/230V
You should turn on the charger on the
switchboard panel with 12V master switches turned off
because the installation was designed to make it possible
to charge all the batteries automatically without boat user
interference. During the first phase you should turn the
charger on (big green button) and check the diodes
(marked with arrows on the picture) to see if it works:
the green and yellow diodes mean that the charger
started and works properly. Then you turn on the master
house switch and DC/TLM indicator, which you switch to
DC AMPS function. If the indicator shows the current voltage
e.g. 7A this means that the charger properly charges the house
batteries. At the same time you may turn on several receivers and observe
what happens on the indicator. If all the activities were carried out in accordance
with the above instructions, the charger will work properly and ensures you that the
electric installation is properly installed. 115/230V