19
FCC Statement
Please note that the power cable that has
been supplied with your device is supplied
with a permanently attached ferrite bead. It is
the responsibility of the user to use the cable
with the ferrite bead.
The user is cautioned that changes or modifi-
cations not expressly approved by XM
Satellite Radio, Inc. can void the user’s
authority to operate this device.
This device complies with Part 15 of the FCC
rules. Operation is subject to the following
two conditions: (1)This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reason-
able protection against harmful interference
in a residential installation.
This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be deter-
mined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the
equipment and the receiver.
- Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced
radio/TV technician for help.
Warning
:The FCC and FAA have not certified
XM Satellite Radio Receivers for use in any
aircraft (neither portable nor permanent
installation).Therefore, XM Satellite Radio
Inc. cannot support this type of application
or installation.
English Skyfi2 install guide:SKYFi2 install guide layout 9/21/2006 12:09 PM Page 20
All manuals and user guides at all-guides.com
