- -
4
Bluetooth operation.
Turn on
To turn on the receiver, please switch the power slide switch to
“ON” side. You can see the LED1 flash blue color once and wait a
moment (about 10 seconds) to turn on the power. At the same time
LED1 will flash blue to wait Bluetooth connection.
Turn off
To turn off the receiver, please switch the power slide switch to
“OFF” side. You can see the all LED dark.
4.3 Charging
Low Power
The left LED(LED 2) indicator will show red when Lithium-Ion
battery power becomes low.
Charging
The left LED(LED 2) indicator will turn green when the battery is
being charged. When fully charged, the green indicator will switch
off.
4.4 Bluetooth Communication
Waiting to connect
The right LED(LED 1) indicator will flash if there is no
communication between the receiver and another device.
Connected
The right LED(LED 1) indicator will turn to continuous lighting
when the receiver is connected through the wireless link with
another device.
4.6 PIN CODE
The
PIN
code means Personal Identification Number for Bluetooth device. The
Bluetooth GPS receiver has the default PIN Code, and is “
0000
”. Generally speaking, there are two
steps in Bluetooth connecting. One is pairing process, the other is link process. If you need PIN code
to pairing and connect, you can use the default pin code, “
0000
” to connect Bluetooth device. Our
GPS receiver belongs to non-safety connecting, you can use in general application to finish
connecting.
