27
A
IR PURIFYING/FAN MODE (FIG. 17)
When using the appliance in this mode, the air exhaust hose
does not need to be attached.
To set this mode correctly:
•
Press the
MODE
button a number of times until the fan symbol
appears.
•
Select the required fan speed by pressing the
FAN
button.
Three speeds are available:
High speed:
for maximum fan power
Medium speed:
reduces noise levels but still main-
tains a good level of comfort
Low speed:
for silent operation
In this mode, AUTO speed cannot be selected.
H
EATING MODE
(
FIG
. 18)
To set this function correctly:
•
Press the MODE button a number of times until the heating
symbol (6) appears.
•
Select the required temperature by pressing the + or - button
until the corresponding value is displayed.
•
In heating mode, the fan speed is selected automatically by
the appliance.
Water is removed from the air and collected in the tank at the
back of the air conditioner.
When the tank is full, the appliance shuts down and " " (full
tank) appears on the display. The tank must be extracted and
emptied (fig. 15).
When the tank has been emptied, the appliance starts up again.
The continuous drain hose accessory enables the condensate
produced to be eliminated without requiring the tank to be emp-
tied periodically.
To use the continuous drain function, fit the hose with the rapid
coupling as shown in fig. 16.
S
MART
M
ODE
(FIG. 19)
To select this mode, press the MODE button a number of times
until the SMART symbol (7) appears.
In this mode, the appliance decides automatically whether to
operate in air conditioning, fan or heating mode, the most suita-
ble temperature for optimum well-being and the fan speed.
S
WING
B
UTTON
(15)
Moves the grille flaps to distribute the cool air uniformly in the
room.
•
When the
SWING
button is pressed once, the flaps begin
moving alternately forwards and backwards. Press the SWING
button again to stop the flaps in their current position. Pressing
the button again will restart the flaps moving forwards and
backwards.
•
When the appliance is turned off, the flaps will close irrespec-
tive of their position.
27
17
19
When operating in very
cold rooms, the appliance
defrosts automatically,
momentarily interrupting nor-
mal operation. "
LT"
appears
on the display. During this
operation, it is normal for the
noise made by the applian-
ce to change.
In this mode, the fan
may operate for short
periods, even though the
set temperature has
already been reached.
✔
✔
18
