A
IR CONDITIONING MODE (FIG. 13)
Ideal for hot muggy weather when you need to cool and dehu-
midify the room.
To set this mode correctly:
•
Press the
MODE
button a number of times until the air-condi-
tioning symbol (3) appears.
•
Select the target temperature by pressing the
+
or
-
button
until the corresponding value is displayed.
•
Select the required fan speed by pressing the
FAN
button.
Four speeds are available:
High speed:
to achieve the target temperature
as rapidly as possible
Medium speed:
reduces noise levels but still
maintains a good level of comfort
Low speed:
for silent operation
Auto speed:
the appliance automatically selects
the most suitable fan speed in relation to the tem-
perature set on the digital display.
The most suitable temperature for the room during the summer
varies from 24 to 27°C. You are recommended, however, not to
set a temperature much below the outdoor temperature.
D
EHUMIDIFYING MODE (FIG. 14)
Ideal to reduce room humidity (spring and autumn, damp rooms,
rainy periods, etc).
Place the appliance in the room without fitting the air exhaust
hose (L).
To set this mode correctly:
•
Press the
MODE
button a number of times until the dehumidif-
ying symbol (4) appears, then press the
+
or
-
button until the
required humidity level is displayed. At the same time, the
Auto fan light comes on as the appliance automatically
selects the most appropriate speed. Water is removed from
the air and collected in the tank at the back of the air condi-
tioner. When the tank is full, the appliance shuts down and
(full tank) appears on the display. The tank must be extracted
and emptied (fig.
15
). When the tank has been emptied, the
appliance starts up again.
The accessory continuous drain hose enables the condensa-
te produced to be eliminated without requiring the tank to be
emptied periodically. Fit the hose with the rapid coupling as
shown in fig.
16
.
NB
: In order for the continuous drain function to operate cor-
rectly, make sure the accessory is fully connected to the
coupling. To release, press the coupling flange.
26
13
14
15
16
