13
8.4 Adjusting the coffee mill
The coffee mill is set by default to prepare coffee correctly and
should not require regulating initially.
However, if after making the first few coffees you find that the
coffee is either too weak and not creamy enough or delivery is
too slow (a drop at a time), this can be corrected by adjusting
the grinding adjustment dial (A5-fig. 14).
Please note!
The grinding adjustment dial must only be turned when the
coffee mill is in operation.
If the coffee is delivered too slowly or
not at all, turn one click clockwise to-
wards “7”.
For fuller bodied creamier coffee, turn
one click anticlockwise towards “1” (do
not turn more than one click at a time
otherwise the coffee could be delivered
a drop at a time).
These adjustments will only be evident after at least 2 cups of
coffee have been delivered. If this adjustment does not obtain
the desired result, turn the dial another click.
8.5 Tips for a hotter coffee
For hotter coffee, you should:
• perform a rinse cycle by selecting the “Rinse” function in
the settings menu (section”7.1 Rinsing”);
• warm the cups with hot water using the hot water function
(section “10.1 Hot water”);
• set a hotter coffee temperature in the settings menu (sec-
tion “7.10 Setting the temperature”).
8.6 Making coffee using coffee beans
Important!
Do not use caramelised or candied coffee beans as they could
stick to the coffee mill and make it unusable.
1. Fill the container (A3-fig. 15) with coffee beans.
2. Place under the coffee spouts (A7):
- 1 cup, if you want to make 1 coffee (fig. 13);
- 2 cups, if you want 2 coffees (fig. 16).
3. Lower the spouts as near as possible to the cup (fig. 16).
This makes a creamier coffee.
4. Press the button corresponding to the number of coffees
required (1 cup
-B11 or 2 cups
-B10).
5. Preparation begins. The amount of coffee selected is dis-
played together with a progress bar which gradually fills as
preparation progresses.
Please note:
• While the machine is making coffee, delivery can be inter-
rupted at any moment by pressing any button.
• At the end of delivery, to increase the quantity of coffee in
the cup, just press (within 3 seconds) one of the coffee but-
tons (
or
) (fig. 17).
Once the coffee has been made, the appliance is ready to make
the next drink.
Please note!
• Various alarm messages could be displayed while using
the appliance (FILL TANK, EMPTY GROUNDS CONTAINER,
etc.). Their meaning is explained in section “16. DISPLAYED
MESSAGES”.
• For hotter coffee, see section “8.5 Tips for a hotter coffee”.
• If the coffee is delivered a drop at a time, too weak and not
creamy enough or too cold, read the tips in section “17.
TROUBLESHOOTING”.
8.7 Making coffee using pre-ground coffee
Important!
• Never add pre-ground coffee when the machine is off or it
could spread through the inside of the machine and dirty
it. This could damage the appliance.
• Never use more than 1 level measure (C2) or it could dirty
the inside of the coffee machine or block the funnel (A4).
Please note!
If you use pre-ground coffee, you can only make one cup of
coffee at a time.
1. Press the
button (B2-fig. 11) until “Pre-ground”
appears on the display (B13).
2. Open the pre-ground coffee funnel lid (A2).
3. Make sure the funnel (A4) is not blocked, then add one
level measure of pre-ground coffee (fig. 18).
4. Place a cup under the coffee spouts.
5. Press the 1 cup coffee button
(B11).
6. Preparation begins. The amount of coffee selected is dis-
played together with a progress bar which gradually fills as
preparation progresses.
Please note!
If “Energy Saving” mode is active, you may have to wait a few
seconds before the first coffee is delivered.
8.8 Making LONG coffee using coffee beans
Prepare the appliance following the instructions in the section
“8.6 Making coffee using coffee beans”, then press the
button (B9-fig. 19): “LONG COFFEE FUNCTION” appears on the
display (B13), together with a progress bar which fills gradually
as preparation proceeds.
