DèLonghi ECAM44660 Скачать руководство пользователя страница 10

Страница: 10 / 18

6. After a few seconds, frothed milk is delivered from the milk

spout (D5) into the cup below. For drinks with coffee, the
machine automatically makes the coffee after delivering
the milk.

Please note: general indications when preparing all

milk based drinks

• If you want to interrupt preparation during delivery, press

any button.

• At the end of delivery, to increase the quantity of milk or

coffee in the cup, just press and hold (within 3 seconds) the
button corresponding to the drink being made.

• Do not leave the milk container out of the refrigerator for

long periods. The warmer the milk (41°F/5°C is ideal), the
poorer the quality of froth produced.

9.5 Cleaning the milk container after every use

Important! Danger of burns

When cleaning the internal tubes of the milk container, a little
hot water and steam leak out of the frothed milk spout (D5).
Avoid contact with splashes of water.
“SET DIAL TO CLEAN” appears on the display (B4) each time you
use a milk function. To eliminate all milk residues, proceed as
follows:
1. Leave the milk container (D) in the machine (you do not

need to empty it);

2. Place a cup or other recipient under the milk spout (fig.

24).

3. Turn the froth adjustment dial (D1) to “CLEAN” (fig. 25). A

progress bar appears and gradually fills as the operation
proceeds together with “Cleaning underway”. Cleaning
stops automatically.

4. Turn the dial back to one of the froth selections.
5. Remove the milk container and always clean the connec-

tion nozzle (A8) with a sponge (fig. 26).

Please note!

• To prepare a number of cappuccinos or milk based coffees,

clean the milk container after you have prepared the last
drink only.

• The milk container can be kept in the refrigerator.
• In some cases, to clean you must wait for the appliance to

heat up.

9.6 Programming the quantity of coffee and

milk in the cup for the CAPPUCCINO button

The appliance is set by default to automatically deliver standard
quantities. To change these quantities, proceed as follows:
1. Place a cup under the coffee spouts (A7) and milk spout

(D5);

2. Press and hold the

CAPPUCCINO

button (B9) until the

name of the drink and “PROGRAM MILK” appear on the
display (B4);

3. Release the button. The appliance starts delivering milk;
4. Once the required quantity of milk has been delivered into

the cup, press the button again;

5. The appliance stops delivering milk and, if required for the

drink being prepared, after a few seconds the coffee is de-
livered into the cup. The name of the drink and “PROGRAM
COFFEE” are displayed;

6. Once the required quantity of coffee has been delivered

into the cup, press the button again. Coffee delivery stops.

The machine is now reprogrammed with the new milk and cof-
fee quantities.

9.7 Programming the quantity of coffee and

milk in the cup for MILK MENU drinks

The appliance is set by default to automatically deliver standard
quantities. To change these quantities, proceed as follows:
1. Place a cup under the coffee spouts (A7) and milk spout

(D5);

2. Press the

MILK MENU

button (B10);

3. Press (B9) or (B10) (fig. 6) until the required drink ap-

pears on the display (B4) (CAFFELATTE, LATTE MACCHIATO,
FLAT WHITE, MILK);

4. Press and hold the

button (B3 - fig. 7) until the name of

the drink and “PROGRAM MILK” appear on the display;

5. Release the button. The appliance starts delivering milk;
6. Once the required quantity of milk has been delivered into

the cup, press the

button;