WATER FILTER
8.
Press the
button to
enter the menu.
9.
Press the
or
button until
“Install Filter”
is displayed.
10.
Press the
button.
11.
The message
“Enable
?
”
is
displayed.
12.
Press the
button to
confirm the selection.
“Hot
Water Confirm
?
”
is displayed.
13.
Position a container with a
minimum capacity of 3.4 oz. /
100 ml under the hot water
spout.
14.
Press the
button to
confirm the selection. The
appliance begins delivering
hot water and the message
“Please Wait“
is displayed.
15.
After delivery, the appliance returns
automatically to the
“Ready for Coffee”
A
C
D
E
Please note!
The filter lasts about two months if the appliance is used normally. If the coffee maker is
left unused with the filter installed, it will last a maximum of three weeks.
B
Installing the filter
1.
Remove the filter from the
packaging.
2.
Turn the date indicator disk
(
A
)
until the next 2 months of
use are displayed.
3.
To activate the filter, put it
under tap water until water
overflows the side openings
for more than 1 minute (min.
500 ml)
(B)
.
4.
Remove the tank from the
appliance and fill with water.
5.
Insert the filter in the water
tank and immerse it completely
for ten or so seconds, sloping
it to enable the air bubbles to
escape
(
C
)
.
6.
Insert the filter in the filter housing
(
D
)
and
press as far as it will go.
7.
Close the tank with the lid
(
E
)
, then place
the tank in the machine. When you install
the filter, you must notify the appliance of
its presence.
Содержание ECAM26.455
Страница 15: ...ECAM26455...
Страница 16: ...Better Everyday www delonghi com like us DeLonghi North America follow us DeLonghiNA...
