DèLonghi DEINV27, Руководство пользователя, Страница: 11 / 32

ƾ
ƽ
ƽ
ƽ
ƽ
ƽ
Slightly to press the place with , along the arrowhead direction to push the back cover of wireless
remote control. (As show in figure)
Take out the old batteries. (As show in figure)
Insert two new AAA1.5V dry batteries, and pay attention to the polarity.
(As show in figure)
Attach the back cover of wireless remote control. (As show in figure)
When changing the batteries, do not use the old or different batteries,
If the wireless remote control will not be used for a long time, please
otherwise, it can cause the malfunction of the wireless remote control.
take them out, and don't let the leakage liquid damage the wireless
remote control.
The operation should be in its receiving range.
It should be placed at where is 1m away from the TV set or stereo sound sets.
If the wireless remote control can not operate normally, please take them out,
after 30s later and reinsert, if they cannot normally run, please change them.
Sketch map for
changing batteries
NOTE:
1. Press swing button continuously more than 2seconds,the main unit will swing back and
forth from up to down, and then loosen the button, the unit will stop swinging and present
position of guide louver will be kept immediately.
2. Under swing mode, when the status is switched from off to , if press this button again
2seconds later, status will switch to off status directly; if press this button again within
2seconds,the change of swing status will also depend on the circulation sequence stated above.
About switch between Fahrenheit and Centigrade
Under status of unit off, press mode and buttons simultaneously to switch
ćDQĢ
Press and buttons simultaneously to lock or unlock the keyboard. If the remote
controller is locked, press any button, the remote control can't work, you must unlock the
keyboard.
ƾ
ƾ
ƾ
About swing
About lock
Operation of wireless remote control
Changing batteries and notices