11
GB
Using the remote control
TURNING THE APPLIANCE ON
Plug into the outlet.
Press the ON/STAND-BY button
(
17
) (when turned on, the air conditioner starts operating in the
same mode as when it was turned off).
Press the
MODE
button (
18
) to select the required mode:
AIR CONDITIONING ( )
DEHUMIDIFYING ( )
FAN ONLY ( )
An arrow on the display indicates the selected mode.
AIR CONDITIONING MODE ( )
Ideal for hot humid weather when you need to cool and dehumidify the room.
In air conditioning mode, use the buttons to select the desired temperature.
The display shows the set temperature.
To change the fan speed, use the fan button
(
16
) on the remote control, choosing from the
available speeds:
the appliance automatically selects the most suitable fan speed in relation to the tem-
perature set on the digital display and current room temperature.
the air conditioner operates at maximum to reach the required temperature as rapidly as
possible.
reduces noise levels while maintaining a comfortable temperature.
for silent operation and maximum energy efficiency.
Two arrows on the display indicate respectively air-conditioning
and the fan speed.
The most suitable temperature for the room during the summer varies from 24 to 27°C. You are
recommended, however, not to set a temperature much below the outdoor temperature.
DEHUMIDIFYING MODE ( )
Ideal to reduce room humidity (spring and autumn, damp rooms, rainy periods, etc).
In dehumidifying mode, the appliance selects fan speed automatically.
Two arrows on the remote control display indicate and respectively.
FAN MODE ONLY ( )
In fan mode, fan speed can be set by pressing the fan button (
16
).
The fan speed changes between the speeds available (LOW/MED/HIGH).
Two arrows on the display indicate the fan mode and the speed set.
In this mode, the auto speed cannot be selected.
SETTING THE TIMER
The timer can be used to delay appliance start up or shutdown. This avoids wasting electricity by
not operating the appliance when it is not needed.
How to program delayed shutdown
•
With the air conditioning unit on, press the timer button (
19
). The time is displayed and the
"h" symbol flashes, with a flashing arrow indicating timer shut-down .
•
Set the time when you want the appliance to go off using the buttons (from 30 minutes to
24 hours). During the first ten hours, you can select half hour intervals. For times greater than ten
hours, one hour intervals can be selected.
•
Press the timer button (
19
) again to confirm the selection. The appliance emits a beep and
the light (
H
) flashes on the control panel, confirming successful activation of the timer. A count-
down of the time left is displayed on the remote control display and the light (
H
) flashes on the
air conditioner display.
