134
5,27
in.
30 cm
11,8 inches
30 cm
11,8 inches
in the
window
pane
in the wall:
you are
recommended
to insulate the
section of wall
using suitable
insulation.
in the
wooden
kickboard
of a
French
window
F
Semi-permanent installation
SEMI-PERMANENT INSTALLATION
If required, your appliance can also be
installed semi-permanently (Fig.
E
).
Proceed as follows:
•
Drill a hole ø 5,25 inches (134 mm) in an
outside wall or through a window pane.
Respect the dimensions and height of the
hole given in figure
F
and
G
.
•
Fit the wall flange (
10
) into the hole.
•
Fit the air exhaust hose (
11
) in the rele-
vant housing located on the rear side of
the appliance. (fig.
A
page 5).
•
Fit the end of the hose (
11
) to the wall
flange (
10
) as shown in fig.
G
.
G
When the hose (
11
) is not connected, the dril-
led hole can be closed with the flange cap
(
10
).
NOTE:
When installing the air conditioner
semi-permanently, you should leave a door
slightly open little as 1/2 “ (1 cm) to guar-
antee correct ventilation and room pressure.
6
E
Keep the air hoses as short and free of
curves as possible to avoid constrictions.
MAX100 cm
MAX 39,37 inches
MIN 35 cm
MAX 13,77 inches
“As special tools are required for installa-
tion, we suggest you have the applian-
ce installed by specialized personnel.”
