17
A9
Power supply cable
A10
Drainage hose with 2 caps
A11
Remote control signal receiver
Description of accessories (See page 3 - B)
B1
Wall flange with cap
B2
Air exhaust hose
B3
Hose adapter (2 pieces)
B4
Wall mounting accessory
B5
Crosspiece grille
B6
Cap for crosspiece hole
B7
Crosspiece
B8
Screws
B9
Window outlet
B10
Remote control
AIR CONDITIONING WITHOUT INSTALLATION
Just a few simple steps and your air conditioner will ensure your
comfort:
• Screw a hose adapter
B3
to one end of the air exhaust hose
B2
.
• Fit the other adapter
B3
in the air exhaust hose housing
A7
on the back of the appliance (see fig. 1).
• Screw the end of the hose without an adaptor to the adap-
tor previously attached to the appliance (see fig. 1).
Sash window
• Fit the crosspiece grille
B5
to the crosspiece
B7
and attach
it using the 4 screws provided
B8
(fig. 2).
• Open the window.
• Put the crosspiece
B7
in the window, extending it the en-
tire width of the window (fig. 3).
• Once the crosspiece has been extended, it can be attached
by screwing in the remaining two screws provided.
• Lower the window (fig. 4).
• Set the air conditioner near the window. Insert the air
exhaust hose
B2
previously assembled in the grille on the
crosspiece
B7
(fig. 5). Make sure the air exhaust hose is not
obstructed.
• When not using the appliance, the crosspiece hole can be
covered with the cap
B6
provided.
Double casement window
•
Apply the window outlet
B9
to the air exhaust hose
B2
that
was previously assembled, as shown in fig. 6.
2
1
1
2
4
3
5
6
