19
A
B
A
B
10. DESCALING
1. (IF PRESENT, REMOVE
THE WATER SOFTENER
DEVICE). Pour the des-
caler into the tank up to
the level
A
marked
inside the tank (equal to
one 100ml packet).
2. Add water (1 liter) up
to the level
B
.
Then put the water tank back in
the appliance.
3. Turn the mode selector
dial (B8) to :
the
light begins to blink:
and the OK light turns to
orange.
4. Make sure the portafilter is
not attached and position a
recipient under the coffee
outlet, hot water spout and
steam wand.
5. Press the OK (B5)
but-
ton: descaling starts.
Please note
• Before use, read the instructions and the labelling on the descaler pack.
• It is important to use De’Longhi descaler only. Using unsuitable descaler and/or performing descaling incorrectly may result
in faults not covered by the manufacturer’s guarantee.
• Descaler could damage delicate surfaces. If the product is accidentally spilt, dry immediately.
4
1
5
2
3
RED
40
Minutes
De’Longhi Appliances s.r.l.
Via L. Seitz, 47 31100 Treviso - ITALY
Tel. +39 0422 4131
5413218631/04.15
Decalcificante per macchine da caffè
Descaler for coffee machines
Détartrant pour machines à café
Entkalker für Kaffeemaschinen
2 L
6. The descale programme starts and the descaler liquid
comes out of the steam wand and coffee outlet. The des-
cale programme removes limescale deposits from inside
the appliance by automatically performing a series of
rinses and pauses until the tank is empty.
Delivery stops and the OK light turns to white. This indicates
that it is necessary to proceed with rinsing: see next page.
When the light (B9) comes
on, it is time to proceed descal-
ing the machine. The descaling
cycle can be run in any moment.
Please note
•
In case you start the descaling
cycle by mistake, you can press
the OK button for 10 seconds; the
rinsing cycle can not be stopped
(from step 9).
