MODELS WITH REMOTE CONTROL
Some models are equipped with a remote control to provide ease of operation.
The appliance can be completely controlled with the remote control.
Two AAA 1,5V batteries are required (not included):
• remove the cover located on the back side of the remote control;
• insert the two AAA 1,5V batteries positioning them correctly (see the instructions in the bat-
teries compartment);
• replace the cover.
REMOTE CONTROL OPERATION
-
When you press the “ON power selection” push button, the appliace operates at the maxi-
mum power. With each further press of the “power selection” push button, the power will
change from MAX to MED/MIN/MAX.
-
If you want to operate with the fan only, press the “Fan Only” pushbutton.
-
Only when a function is selected it is possible to activate the oscillation of the appliance, by
pushing the “ON/OFF oscillating base” push button.
-
The “Off” push button switches off the appliance.
Every time you press a button, the appliance will confirm the selection with a “beep” and the
pilot light on the remote control will illuminate.
MAINTENANCE
- Before cleaning always switch off and remove the plug from the elettrical socket.
-
Periodically clean the air intake and outlet grilles during the period in which the heater is
in use.
-
To clean the unit, do not use solvents or abrasive detergents. A soft dry cloth should be used to
clean the surfaces of the heater.
Fig. 4
ON power selection
pushbutton
Fan Only pushbutton
ON/OFF oscillating base
pushbutton
Off
Pilot light
GB.qxd 6-08-2003 10:20 Pagina 5
