ELECTRICAL CONNECTION
-
Before using the appliance check that your supply voltage is the same of that shown on the
rating label of the unit.
-
THIS APPLIANCE CONFORMS TO DIRECTIVE 89/336/CEE GOVERNING RADIO INTERFE-
RENCE.
INSTALLATION
The heater can be used on a horizontal surface.
Models with a motorised base can be wall-mounted, using 3 screws and 3 wall plugs.
To wall-mount, proceed as follows:
Drill holes in the wall, as shown in Fig.1, paying particular attention to the minimum distances indicated.
Hang the applince on the wall and fasten it using the third screw at the bottom.
Portable appliances are not suitable for use in a bathroom.
The appliance must not be positioned directly underneath a fixed power point.
FUNCTIONING AND USE
This heater has ECC (electronic climate control) which automatically monitors and selects the ideal power
to maintain the chosen temperature.
FAN HEATER CONTROLS:
The thermostat will adjust the set temperature .
OPERATION AND USE
By pressing the “
ON/OFF
” button (Fig. 3) one or more times (a beep will confirm each selec-
tion), the appliance will select the operating heating power, as follow:
Max (maximum power)
Med (medium power)
thermostat dial
Fig.3
These two LEDs indicate the
selected power level
As the appliance cycles
between the different power
levels when it is in use, these
two LEDs indicate the level
currently in use
ON/OFF button
ventilation only
Voltage
Wattage
See rating label
GB.qxd 6-08-2003 10:20 Pagina 3
