16
Removal of the inner glass door panel
The inner glass door panel can easily be removed for cleaning by unscrewing the two
screws. Figure 11.
During re-assembly, ensure that the inner glass is correctly aligned and do not over tighten
the screws.
Assembling and removing the side racks
Hang up the wires racks on the oven walls (fig. 9)
Slide the required grid or tray into the guides (fig. 10).
Cleaning oven parts after use
The oven interior and the chromium plated shelves can be cleaned by damp soapy cloth.
Obstinate stains can be removed with nylon scouring pads and gentle, non-abrasive, liquid
cleaner. Provided the oven is wiped over immediately after roasting, only the minimum of
cleaning should be necessary.
Do not use a steam cleaner because the moisture can get into the appliance thus
make it unsafe.
Stainless steel
Clean with a suitable products. Always dry completely.
Gas taps
If a tap becomes stiff,
do not force
; contact your local COMET Service Centre.
(See enclosed Service Information).
Flexible tube
From time to time, check the flexible tube connecting the gas supply to the cooker.
It must be always in perfect condition; in case of damage arrange for it to be replaced by a
C.O.R.G.I. registered installer.
