10
• Open the cover and empty the iron, holding it point
downwards and shaking it gently over a basin or sink.
• To dry the remaining moisture, turn the iron on again
with the thermostat in the maximum position for about
two minutes with the steam regulator in the MAX posi-
tion.
• Unplug from the mains socket and allow to cool.
• Clean the plate with a dry cloth as traces of moisture
could mark it.
• Wind the power cable around the cable winder.
• Store the iron in a vertical position.
MAINTENANCE AND CLEANING
After use, always wait until the iron is cold before putting
away. Allow to cool in a vertical position. Keep the surfa-
ce of the plate clean. Do not rest or use the iron on zips,
hooks, rings etc to avoid scratching the plate. Clean the
plate with a damp cloth only, never use abrasives or sol-
vents.
If the amount of stream drops during use, this could be cau-
sed by excessive build-up of limescale.
To remove, proceed as follows:
• fill the tank to the "MAX" level;
• plug the appliance into the mains and place the ther-
mostat in the MAX position. When the iron has reached
the required temperature (light off), unplug the applian-
ce and leave in a horizontal position;
• place over a sink;
• press the SELF CLEAN button;
• turn the steam regulator clockwise as far as it will go.
The limescale rod is released and the regulator lifts up;