DeLonghi FXH 3, Инструкция пользователя

Страница: 15 / 15

A) If your appliance comes fitted with a
plug, it will incorporate a 13 Amp fuse.
If it does not fit your socket, the plug
should be cut off from the mains lead,
and an appropriate plug fitted, as
below.
WARNING: Very carefully dispose
of the cut off plug after removing the
fuse: do not insert in a 13 Amp
socket elsewhere in the house as this
could cause a shock hazard.
With alternative plugs not incorpora-
ting a fuse, the circuit must be pro-
tected by a 15 Amp fuse.
If the plug is a moulded-on type, the
fuse cover must be re-fitted when
changing the fuse using a 13 Amp
Asta approved fuse to BS 1362. In
the event of losing the fuse cover, the
plug must NOT be used until a repla-
cement fuse cover can be obtained
from your nearest electrical dealer.
The colour of the correct replacement
fuse cover is that as marked on the
base of the plug.
B) If your appliance is not fitted with a
plug, please follow the instructions
provided below:
WARNING - THIS APPLIANCE MUST BE
EARTHED
IMPORTANT
The wires in the mains lead are coloured
in accordance with the following code:
Green and yellow: Earth
Blue: Neutral
Brown: Live
As the colours of the wires in the mains
lead may not correspond with the colou-
red markings identifying the terminals in
your plug, proceed as follows:
The green and yellow wire must be con-
nected to the terminal in the plug marked
with the letter E or the earth symbol
or coloured green or green and
yellow.
The blue wire must be connected to the
terminal marked with the letter N or
coloured black.
The brown wire must be connected to the
terminal marked with the letter L or
coloured red.
N
E
L
ELECTRICAL CONNECTION (UK ONLY)
9
• Wind the power cable around the cable winder.
• Store the iron in a vertical position.
MAINTENANCE AND CLEANING
After use, always wait until the iron is cold before putting
away. Allow to cool in a vertical position. Keep the surface
of the plate clean. Do not rest or use the iron on zips, hooks,
rings etc to avoid scratching the plate. Clean the plate with a
damp cloth only, never use abrasives or solvents.
SCALE PREVENTION SYSTEM
The appliance is fitted with a permanent resin scale filter in the
tank. This filters the impurities and eliminates all scale residue,
thus enabling you to use normal tap water The resins reduce
water hardness, doubling the working life of the iron.