DeLonghi FXH 3, Инструкция пользователя

Страница: 12 / 15

STEAM IRONING
This iron works with normal tap water.
a) Before filling the tank, make sure the steam regulator
E
is in the position ("dry" position) (fig. 1). Make sure
the power cable is unplugged from the mains socket.
b) Open the cover of the opening D and pour the water
into the iron (fig. 2) keeping the iron in a horizontal
position.
It is important that the iron is always unplugged from the
mains every time you fill or top up the water in the tank.
c) Plug the iron into the mains socket.
d) A special segment on the thermostat knob
I
identifies the
steam range. The steam will be wet if the thermostat
pointer
I is at the beginning of the segment and dryer if
it is towards the end. Make sure the fabric to be ironed
is suitable for steam ironing. When using the iron for the
first time, you are recommended to pass it several times
over a piece of cloth first.
e) After these checks, select the required temperature by
rotating the thermostat knob I .
f) The indicator light
H
will come on to show the iron is on.
After about a minute in the case of maximum tempera-
ture, the indicator light will go off showing that the iron
is ready for use.
g) Continuous steam delivery is obtained by positioning
the steam regulator E in the or position (to obtain
more steam). Steam delivery ceases whenever the iron
is placed in a vertical position on the rear rest (position
recommended during pauses in ironing) or with the iron
horizontal when the steam regulator
E is in the dry posi-
tion.
Note: On the back of the iron there is a useful guide giving
information on the temperature to set according to
the garment being ironed:
6