background image

5

In the event of malfunction and/or faulty operation, switch off the
appliance and take it to an authorised service centre. 

This appliance must be used exclusively for the purpose for
which it was expressly conceived. Any other use is considered
improper and thus dangerous.

The manufacturer is not liable for damage caused by inappro-
priate, incorrect or irresponsible use or for damage resulting
from repairs carried out by unqualified personnel.

Never overfill the tank and never add stain removers or similar
products.

Save these instructions for future reference.

The iron must be used on a stable ironing board

If the appliance is dropped causing visible damage, do not use.
Take to a professional service centre.

The iron should be placed on a flat surface extremely resistant
to high temperatures.

This appliance conforms to safety standards and is constructed to
avoid generating radio interference in accordance with EC Directi-
ve 87/308. 

MAIN COMPONENTS

Read this manual thoroughly before using the appliance. This
will ensure optimum results and maximum safety.

Important: 

Before plugging the appliance in, check that the

mains voltage corresponds to the voltage (V) indicated on the
rating plate of the iron. The socket must be efficiently earthed. 

Plate (stainless steel or non-
stick depending on model)

Transparent tank

Self-clean button

Thermostat dial

"Easy Refill" cap

F

"Auto Shut-Off" indicator

light (model FXC. 21 only)

Steam burst button 

Spray button

Steam regulator

Indicator light

Spray

Содержание FXC 21








Отзывы: