background image

EN

IMPORTANT:

When this function is active, the appliance heats at reduced 
power and therefore the room takes longer to warm up.

Even when this function active, children should still be 
supervised to make sure they are not in danger.

Always avoid prolonged contact between the appliance and 
the body.

If the appliance is already operating or is still hot after recent 
use and “Children Safety“ is activated, it takes at least two 
hours for the temperature to drop to the lower value and the 
function to be operational.

4.5.4 KEYPAD LOCK

It is possible to lock the remote control keypad to avoid ac-
cidental modifications.

To activate the function, press the “Mode” and 
“+” buttons together and hold them both down 
until  the  icon        

appears  on  the  display.

IMPORTANT:

The “Keypad lock” function does not inhibit the 
“Standby” button. This is therefore always active, 
even when the “Keypad lock” function is enabled.

To unlock the keypad, press the same two buttons together 
as before.
The “Keypad lock“ icon will no longer appear on the LCD.

4.5.5 FAN HEATER 

The “Fan Heater“ function is only available on the radiators 
equipped with fan heater. It is not available on this product.  
If the “Fan Heater“ is pressed, the appliance confirms the com-
mand reception but it does not modify its current state.

4.6  OPERATION WITH THE STANDBY BUT-

TON ON THE SIDE CONTROL PANEL

The ”Standby” button, located at the bottom of the remote 
control housing on the side of the appliance (see Fig. 9), can 
be used to turn the radiator on and off without the remote 
control. 
To turn the appliance on and off, press the ”Standby” button. 
The radiator comes on in ”Pilot Wire” mode and emits a beep.  
If the Pilot Wire is connected and the programming unit is 
active, the appliance performs the “Pilot Wire“ order set on 
the programming unit. Otherwise it performs the ”Comfort” 
order.  The LEDs change colour accordingly (see page 40 for a 
description of the colours).
The appliance emits a double beep when it enters the 
”Standby” mode and a single long beep when it exits the 
”Standby” mode. 
When the radiator is turned on using the ”Standby” button 
on the side control panel, the ”Comfort” temperature is set at 
19°C and all functions are reset to the default values.
To go back to controlling the appliance using the remote 
control, turn the radiator on using the ”Standby” button on 
the remote control.   The appliance starts operating with the 
modes, temperatures and functions set on the remote con-
trol. 

IMPORTANT:

 After using the ”Standby” button on the side 

control panel, the appliance ignores all orders transmitted 
by the remote control other than ”Standby” and emits three 
beeps to indicate the error. 

4.5.3 LED DISABLE

If the radiator is placed in a bedroom or in another place 
where the light from the LEDS may be annoying, it is possible 
to activate the “LED DISABLE” function. If this function is ac-
tive, the LEDS turn automatically off 15 seconds after the last 
received command.

To activate the function, press the ”     ” and ”+” 
buttons together and hold them down until 
”LED OFF” is displayed. 

To disable the function, repeat the operation. ”LED ON” is 
displayed. 

IMPORTANT:

The ”LED Disable” function is not active when the 
appliance is in ”Standby” mode. 

IMPORTANT: 

In case of power down due to a black-out, all 

the current settings are kept in memory for about 1 hour 
and a half. At recovery from power down after 1 hour and a 
half, the appliance goes to the previously selected operating 
mode, loosing the hour and day of the week.
If the power down happens when the radiator is in “Chrono“ 
mode and the recovery takes place after 1 hour and a half, 
the appliance goes to “Comfort“ mode with temperature set 
point 17 °C.
The user settings will be restored as soon as the first com-
mand is sent from the RCU.

ATTENTION:

If the batteries are flat, the “batt” warning appears 
on the display of the remote control.

              
             8

Содержание Fivy











Отзывы: