End of frying time
When the selected frying time is completed, hook the basket
to the bowl’s rim (fig.5) and check that food is golden brown
as desired. If more cooking is needed, lower the basket and
keep on frying.
When the food is cooked, switch the appliance off by setting
the thermostat control to “OFF” until the switch is heard to click
off. Leave the contents to drip for a moment.
If frying is to be done in two phases (e.g. potatoes),
open the lid; hook the basket to the bowl, lower the
lid without closing it wait for the indicator light to go
off and lower basket again (see enclosed table).
Filtering of oil or fat
It is advisable to filter the oil or fat after frying in order to
remove any food particles, especially if the food is coated in
breadcrumbs or flour. Food particles remaining in the oil tend
to burn, which causes the oil to deteriorate more quickly.
For models fitted with a drainage tube
Proceed as follows:
1. Raise the lid of the fryer and remove the basket. Check that
the oil is sufficiently cool (about 2 hours).
2. Open the panel (
L
) as shown in fig. 4 and remove the
drainage tube (
M
)
3. Remove the cap (fig. 6). Take care to pinch the end of the
tube with two fingers so that the oil does not drain until the
tube has been placed in a receptacle.
2.
Models with an electronic timer (E)
, may be set to whatever cooking time you
desire. If the timer comes with a battery protection tab (H), pull the tab out slightly and
then proceed as follows:
• Press the ON/START push-button (G): the timer will come on and the figures will start to
flash;
• Press the “+min” button (F) until the desired setting is obtained;
• By pressing the “ON/START” (G) button, the timer will start the count displayed. The
figures will stop flashing and the decimal point will start to flash instead.
• If an error is made, the count is cancelled by pressing push-buttons F and G
simultaneously: in this way the timer is reset at zero.
6
4
• Once the cooking time is completed, an acoustic signal is
given (to stop the signal, simply press one of the two push
buttons).
The acoustic signal indicates that the programmed cooking
time is over,
but the appliance is still operating.
• The timer switches off automatically 20 seconds after the
audible signal has been given.
The electronic timer may be removed from the equipment
for your easy use (see fig. 4).
5
f 270 UK 30-11-2000 16:11 Pagina 6
