DeLonghi EMF2, Инструкция по эксплуатации

Страница: 9 / 10

8
DESCRIPTION (page 3)
1. Lid
2. Hot/frothed milk accessory
3. Whisk
4. Milk container
5. Milk container handle
6. ON/OFF/function button:
Hot frothed
milk
red LED
Press once
(fig. 6)
Hot milk (not
frothed)
flashing red LED
Press twice
(fig. 7)
Cold frothed
milk
blue LED
press and
hold for a few
seconds (fig. 8)
7. Base with electrical connector
8. Power cord
TROUBLESHOOTING
Problem Cause Solution
The appliance does not come on It is not plugged into the mains socket. Plug into the mains.
The appliance has a safety device which
imposes a 30 second pause between one
preparation and the next. Wait, then select the required function.
There is little or no froth on the milk The “Hot milk (not frothed)” function is
selected. Prepare the milk again, using milk at
refrigerator temperature and pressing
the function button once (red LED on
steadily).
The milk is too hot. Use milk at refrigerator temperature.
After cleaning, the whisk (3) has not
been replaced in the hot/frothed milk ac-
cessory, or the whole accessory is absent
or incorrectly positioned. Insert the whisk in the accessory and
make sure the accessory is correctly po-
sitioned in the appliance.
The milk overflows. Too much milk has been placed in the
container. Always respect the MAX quantity indica-
ted for each preparation.
The appliance is standing on a sloping
surface. The appliance must always be operated
on a flat surface.
The blue LED flashes The appliance has been operated without
milk. Remove the appliance from the base.
Wait until it cools down. To cool it
down faster, pour milk at refrigerator
temperature into the container.
Please note:
Preparation can be interrupted at any moment by simply lifting
the milk container from the base or pressing the
button
once.