DeLonghi ELLETA EXPLORE ECAM45.5Y Series, Инструкция по эксплуатации

Страница: 12 / 32

12
5. The appliance starts making the beverage and a descrip-
tion of each individual phase (grinding, brewing coffee)
appears on the display.
At the end of preparation, the appliance is ready to make the
next beverage.
8.5 Bean Adapt Technology & Espresso SOUL
A coffee expert at your fingertips to help you optimise coffee
brewing and the result in your cup in just a few steps.
The smart technology guides you to adjust the machine accord-
ing to the coffee beans used - from grinding coarseness to brew-
ing, each phase will be regulated to get the best results from
the coffee bean.
Download and open the Coffee Link App to find out more.
Once the settings have been saved in the “Bean Adapt Technol-
ogy” section of the App, you can use the “Espresso SOUL” (C1)
beverage on the homepage (C).
To make espresso coffee, follow the instructions in section “8.2
Directly selected beverages”.
Please note:
You can modify the quantity of the “Espresso SOUL” recipe as
described in section “8.3 Customising the beverages”.
8.6 General indications for making coffee
beverages
• A quantity of water above level 1 is sufficient to complete
most beverages. Always filling above level 1 allows the ap-
pliance to estimate the amount of water available to make
the beverages.
• While the machine is making the coffee, preparation can be
interrupted at any moment by pressing “Stop” or “Cancel”.
• As soon as delivery has ended, to increase the quantity
of coffee, just press “Extra”. When the required quantity is
reached, press “Stop” or “Cancel”.
• Various alarm messages could be displayed while using
the appliance (“Please fill the tank with fresh water up to
MAX level” etc.). Their meaning is explained in section “20.
Displayed messages”.
• If the coffee is delivered a drop at a time, too weak and not
creamy enough, or too cold, consult the tutorial on how
to adjust grinding) (see section “6.4 Adjust grinder”) and
section “21. Troubleshooting”.
• If “Energy Saving” mode is activated, there may be a few
seconds delay before the first coffee is delivered.
8.7 Tips for a hotter coffee
To make a hotter coffee, proceed as follows:
• perform a rinse cycle before making the coffee (section
“6.1 Rinsing”);
• warm the cups with hot water using the hot water function
(see section “10. Preparing hot water and hot tea”);
• increase the coffee temperature (section “6.5 Coffee
temperature”).
8.8 Coffee pot
Based on espresso coffee, this beverage is light and balanced,
with a fine layer of froth, ideal to share in company.
Optional accessory in certain models:
Pot
(capacity 1 litre)
Type: DLSC021
EAN: 8004399333642
To make the beverage, proceed as follows:
1. On the homepage (C), press the image corresponding to
the “Coffee Pot” beverage (C1);
2. Selection the number of cups to make and the desired
aroma;
Number of cups
Number of
grindings
Total quantity
(ml)*
2 2 250
3 3 375
4 4 500
5 5 625
6 6 750
* The quantities indicated are approximate and may vary ac-
cording to the type of coffee.
3. Press “Start” to move on to the next step;
4. Fill the tank (A22) with water and fill the beans container
(A2) as instructed on the display (fig. 17). Once you have
made sure there is sufficient water and coffee for the bev-
erages you want to prepare, press “Next”;
17
5. Place the coffee pot (D8) under the coffee spouts (A7).
Press “Brew”;
6. The appliance starts making the beverage with an appro-
priate number of grindings for the number of cups to be