DeLonghi ECAM45.32X, Инструкция по эксплуатации

Страница: 13 / 22

12
Customising the “my coffee” quantity
The appliance is set by default to automatically deliver 30 ml of
“MY COFFEE”.
To modify this quantity, proceed as follows:
1. Place a cup under the coffee spouts (fig. 12).
2. Press the
button (fig. 12) until “MY COFFEE” is
displayed.
3. Keep the button (fig. 16) pressed until the message
“1 MY COFFEE Program quantity” is displayed and coffee
delivery begins. Release the button.
4. As soon as the coffee in the cup reaches the required level,
press the button (fig. 16) again.
The quantity of coffee in the cup set has now been programmed.
Adjusting the coffee mill
The coffee mill is set by default to prepare coffee correctly and
should not require regulating initially.
However, if after making the first few coffees you find that the
coffee is either too weak and not creamy enough or delivery is
too slow (a drop at a time), this can be corrected by adjusting
the grinding adjustment dial (fig. 13).
Please note!
The grinding adjustment dial must only be turned when the
coffee mill is in operation.
If the coffee is delivered too slowly or
not at all, turn one click clockwise to-
wards “7”.
For fuller bodied creamier coffee, turn
one click anticlockwise towards “1” (do
not turn more than one click at a time
otherwise the coffee could be delivered
a drop at a time).
These adjustments will only be evident after at least 2 cups of
coffee have been delivered.
If this adjustment does not obtain the desired result, turn the
dial another click.
Tips for a hotter coffee
For hotter coffee, you should:
• perform a rinse cycle, selecting the “Rinsing” function in
the settings menu (page 10).
• warm the cups by rinsing them with hot water (using the
hot water function);
• increase the coffee temperature in the settings menu
(page 11).
Making coffee using coffee beans
Important!
Do not use caramelised or candied coffee beans as they could
stick to the coffee mill and make it unusable.
1. Fill the container with coffee beans (fig. 14).
2. Place under the coffee spouts:
- 1 cup, if you want to make 1 coffee (fig. 12);
- 2 cups if you want 2 coffees (fig. 15).
3. Lower the spout as near as possible to the cups (fig. 15).
This makes a creamier coffee.
4. Press the button corresponding to the number of coffees
required (1 cup or 2 cups ).
5. Preparation begins. The amount of coffee selected is di-
splayed together with a progress bar which gradually fills
as preparation progresses.
Please note:
• While the machine is making coffee, delivery can be inter-
rupted at any moment by pressing any button.
• At the end of delivery, to increase the quantity of coffee in
the cup, just press (within 3 seconds) one of the coffee but-
tons (
or ) (fig. 16).
Once the coffee has been made, the appliance is ready to make
the next drink.
Please note!
• Various alarm messages could be displayed while using
the machine (FILL TANK, EMPTY GROUNDS CONTAINER,
etc.). Their meaning is explained in the section “Displayed
messages” (page 20).
• For hotter coffee, see the section “Tips for a hotter coffee”
(page 12).
• If the coffee is delivered a drop at a time, too weak and
not creamy enough or too cold, read the tips in the “Trou-
bleshooting” section on page (page 20).
Making coffee using pre-ground coffee
Important!
• Never add pre-ground coffee when the machine is off or it
could spread through the inside of the machine and dirty
it. This could damage the appliance.
• Never use more than one level measure or it could dirty the
inside of the machine or block the funnel.
Please note!
If you use pre-ground coffee, you can only make one cup of
coffee at a time.
1. Press the button (fig. 10) repeatedly until “Pre-
ground” is displayed.