DeLonghi ECAM45.32X, Инструкция по эксплуатации

Страница: 11 / 22

10
• release the main switch at the back of the appliance (fig.
2).
Important!
Never press the main switch while the appliance is on.
MENU SETTINGS
When you access the settings menu by pressing the MENU/ESC
button, scroll the menu items by pressing < or > (fig. 9).
Rinsing
Use this function to deliver hot water from the spout to heat the
internal circuit and make the coffee delivered hotter.
To enable the function, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press < or > (fig. 9) until “Rinsing” is displayed;
3. Press the button: “Confirm?” will be displayed.
4. Press the button (fig. 3): after a few seconds, hot
water flows out of the spout, heating the internal circuit
and making the coffee delivered hotter.
Please note!
Press any button to stop hot water delivery at any time.
Descaling
For instructions on descaling, see page 16.
Install filter
For instructions on how to install the filter, see the section
“Water softener filter” (page 17).
Replacing the filter (if installed)
For instructions on how to replace the filter, see the section “Re-
placing the filter” (page 18).
Adjust time
To adjust the time on the display, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press < or > (fig. 9) until “Adjust time” is displayed;
3. Press the button (fig. 3): the hours flash;
4. Press < or > (fig. 9) to change the hours;
5. Press the button to confirm: the minutes flash;
6. Press < or > (fig. 9) to change the minutes;
7. Press the button to confirm.
This sets the time. Press the MENU/ESC button to exit the menu.
Auto-start
You can set the auto-start time in order to have the appliance
ready at a certain time (for example in the morning) so you can
make coffee immediately.
Please note!
To enable this function, the time must already be set correctly.
To enable auto-start, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press < or > (fig. 9) until “Auto-start” is displayed;
3. Press the
button. “Enable?” is displayed;
4. Press the button to confirm;
5. Press < or > to choose the hours;
6. Press the
button to confirm;
7. Press < or > (fig. 9) to change the minutes;
8. Press the
button to confirm;
9. Then press the MENU/ESC button to exit the menu.
Once the time has been confirmed, activation of auto-start is
indicated by the symbol
displayed under the menu item
and alongside the time.
To disable the function:
1. Select auto-start from the menu;
2. Press the
button. “Disable?” is displayed;
3. Press the button to confirm.
The symbol is no longer displayed.
Auto-Off (standby)
Auto-off mode can be set, so that the appliance switches off
when not used for 15 or 30 minutes, or 1, 2 or 3 hours.
To programme Auto-off, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press < or > (fig. 9) until “Auto-off” is displayed;
3. Press the
button;
4. Press < or > (fig. 9) until the required operating time (15
or 30 minutes, or 1, 2 or 3 hours) is displayed;
5. Press the button to confirm;
6. Then press the MENU/ESC button to exit the menu.
Auto-off is programmed.
Energy saving
Use this function to enable or disable energy saving.
When enabled, the function reduces energy consumption in
compliance with European regulations.
To disable (or enable) energy saving, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press < or > (fig. 9) until “Energy saving” is displayed;
3. Press the
button. “Disable?” is displayed (or “Ena-
ble?” if the function has been disabled);
4. Press the button to disable (or enable) energy sa-
ving mode;
5. Then press the MENU/ESC button to exit the menu.
When the function is active, if the machine is not used for some
time, “Energy saving” is displayed.