DeLonghi ECAM35X.15 Series, Инструкция по эксплуатации

Страница: 13 / 24

12
3. Press the icon (B12). The beans (B7) on the touch
screen flash;
4. Press the
OK
icon (B15) to reset the default values
(or
ESC
(B14) to exit without making the change).
The lights go off.
The settings and quantities of the beverages have been reset to
the default values.
14. RINSING
Use this function to deliver hot water from the coffee spouts
(A19) to clean and heat the appliance’s internal circuit.
Place a container with a minimum capacity of 100ml under the
coffee and hot water spouts.
Important! Danger of burns.
Do not leave the appliance unattended while hot water is being
delivered.
1) To activate the function, press
OK
(B15);
2) After a few seconds, hot water is delivered from the cof-
fee spouts, cleaning and heating the appliance’s internal
circuit.
3) To interrupt the function manually, press OK again.
Please note!
• If the appliance is not used for more than 3-4 days, when
switched on again, we strongly recommend performing
2/3 rinses before use;
• After cleaning, it is normal for the coffee grounds container
(A11) to contain water.
15. MAKING COFFEE
15.1 Adjusting the coffee mill
The coffee mill is set by default to prepare coffee correctly and
should not require regulating initially.
However, if after making the first few coffees you find that the
coffee is either too weak and not creamy enough or delivery is
too slow (a drop at a time), this can be corrected by calibrating
the coffee grinding using the adjusting dial (A5) (fig. 8).
Please note:
The grinding adjustment dial must only be turned when the
coffee mill is in operation.
If the coffee is delivered too slowly or not
at all, turn one click clockwise towards 7.
For fuller bodied creamier coffee, turn
one click anticlockwise towards 1 (do not
turn more than one click at a time other-
wise the coffee could be delivered a drop
at a time).
These adjustments will only be evident after at least 2 cups of
coffee have been delivered. If this adjustment does not obtain
the desired result, turn the dial another click.
15.2 Tips for a hotter coffee
For hotter coffee, you should:
• perform a rinse cycle by pressing
OK
(B15);
• warm the cups with hot water using the hot water function
(see section “17. Delivering hot water”);
• increase the coffee temperature (see section “8. Setting
water hardness”).
15.3 Making coffee using coffee beans
Important!
Do not use green, caramelised or candied coffee beans as they
could stick to the coffee mill and make it unusable.
1. Fill the container (A3) (fig. 9) with coffee beans;
2. Place under the coffee spouts (A19):
- 1 cup, if you want to make 1 coffee (fig. 10);
- 2 cups if you want 2 coffees.
3. Lower the spouts as near as possible to the cup. This makes
a creamier coffee (fig. 11);
4. Then select your required coffee:
Recipe Quantity Program-
mable
quantity
Default
aroma
Espresso
(B10)
≃
40 ml from
≃
30 to
≃
80ml
Espresso
Lungo
(B11)
≃
120 ml from
≃
80 to
≃
180c
Coffee
(B12)
≃
180 ml from
≃
100 a
≃
240cc
Long (B13)
≃
160 ml from
≃
115 to
≃
250cc
2x (B9)
+
Espresso
(B10)
≃
40 ml x
2 cups
--