DeLonghi ECAM35X.15 Series, Инструкция по эксплуатации

Страница: 11 / 24

10
Connect the appliance to an efficiently earthed and correctly
installed socket with a minimum current rating of 10A only.
If the power socket does not match the plug on the appliance,
have the socket replaced with a suitable type by a qualified
professional.
5.4 Setting up the appliance
Please note:
• Coffee has been used to factory test the appliance and it is
therefore completely normal for there to be traces of cof-
fee in the mill. The machine is, however, guaranteed to be
new.
You should customise water hardness as soon as possible follow-
ing the instructions in section “20. Setting water hardness”.
Proceed as described:
1. Plug the appliance into the mains socket and press the
main switch (A6) on the back of the appliance (fig. 1).
2. The light (B3) flashes on the touch screen (B): Re-
move the water tank (A17 - fig. 2), fill to the MAX line with
fresh water (fig. 3A) then put back in the appliance (fig.
3B).
3. The icon (B14 - fig. 5) flashes on the touch screen.
4. Place a container with a minimum capacity of 100 ml
under the cappuccino maker (A20) (fig. 4).
5. Turn the steam/hot water dial to the "I" position (fig. 6)
and press the OK icon (B15). Water is delivered
from the cappuccino maker.
6. When delivery stops automatically, the icon flashes
on the touch screen to indicate that the steam dial must be
turned back to the " O " position.
The appliance goes off.
To use it, press the
button (A23 - fig. 7).
Please note:
• The first time you use the appliance, you need to make 4-5
cups of coffee before it starts to give satisfactory results.
• To enjoy your coffee even more and improve the perfor-
mance of your appliance, we recommend installing a
water softener filter (C4) as described in section “21. Water
softener filter”. If your model is not provided with a filter,
you can request one from De'Longhi Customer Services.
6. TURNING THE APPLIANCE ON
Please note:
Before turning the appliance on, make sure the main switch
(A6) on the back of the appliance is pressed (fig. 1).
Each time the appliance is turned on, it performs an automatic
preheat and rinse cycle which cannot be interrupted. The appli-
ance is ready for use only after completion of this cycle.
Danger of burns!
During rinsing, a little hot water comes out of the coffee spouts
(A19) and is collected in the drip tray (A15) underneath. Avoid
contact with splashes of water.
• To turn the appliance on, press the button (A23) (fig.
7). The light (B1) flashes on the touch screen (B) to in-
dicate the appliance is heating up.
While heating up, the machine performs a rinse cycle. As well
as heating the boiler, this also heats the internal circuits by cir-
culating hot water.
The appliance is at temperature when the
light on the touch
screen goes off and the coffee icons come on.
7. TURNING THE APPLIANCE OFF
Whenever the coffee machine is turned off after being used to
make coffee, it performs an automatic rinse cycle.
Danger of burns!
During rinsing, a little hot water flows from the coffee spouts
(A19). Avoid contact with splashes of water.
• To turn the appliance off, press the
button (A23 - fig.
7);
• the light (B1) flashes on the touch screen and (if pro-
vided for) the appliance performs a rinse cycle then goes
off (standby).
Please note!
If you will not be using the appliance for some time, unplug
from the mains socket:
• first turn the appliance off by pressing the
button
(fig. 7);
• release the main switch (A6) (fig. 1).
Important!
Never press the main switch while the appliance is on.
8. SETTING WATER HARDNESS
For instructions on setting water hardness, see section “20. Set-
ting water hardness”.
9. SETTING TEMPERATURE
If you want to modify the temperature of the water used to
make the coffee (low, medium, high, maximum), proceed as
follows:
1. With the appliance off (standby), but the main switch
pressed (fig. 1);