DeLonghi ECAM28.46X, Инструкция по эксплуатации

Страница: 15 / 24

14
Adjusting the amount of froth
Turn the froth adjustment dial on the milk container lid to
adjust the amount of froth on the milk delivered while making
drinks with milk.
Dial
position Description Recommended for…
No froth LATTE/
HOT MILK
Min. froth FLAT WHITE
Max. froth CAPPUCCINO/ HOT MILK
(FROTHED MILK)
Making drinks with milk automatically
The CAPPUCCINO, LATTE, FLAT WHITE and HOT MILK buttons
on the control panel enable these drinks to be prepared
automatically.
Proceed as follows:
1. Fill the milk container and attach it as described above.
2. Turn the froth adjustment dial on the milk container lid to
the position corresponding to the required froth.
3. Press the button corresponding to the required drink.
The name of the drink selected is displayed together
with a progress bar which gradually fills as preparation
progresses.
4. After a few seconds, frothed milk is delivered from the
milk spout into the cup below. For drinks with coffee, the
machine automatically makes the coffee after delivering
the milk.
Please note!
• If during delivery you want to stop preparation, press the
corresponding button.
• At the end of delivery, to increase the quantity of milk or
coffee in the cup, just press (within 3 seconds) the button
corresponding to the drink being made.
• Do not leave the milk container out of the refrigerator for
long periods. The warmer the milk (5°C is ideal), the poor-
er the quality of froth produced.
Cleaning the milk frother with the CLEAN button
Important! Danger of burns
When cleaning the internal tubes of the milk container, a little
hot water and steam leak out of the frothed milk spout.
Avoid contact with splashes of water.
“SET DIAL TO CLEAN” flashes on the display each time you use
a milk function. To eliminate all milk residues, proceed as fol-
lows:
1. Leave the milk container in the machine (you do not need
to empty it);
2. Place a cup or other recipient under the frothed milk
spout.
3. Turn the froth adjustment dial to “CLEAN” (fig. 22). A
progress bar appears and gradually fills as the operation
proceeds together with “Cleaning underway, Please wait”.
Cleaning stops automatically.
4. Turn the dial back to one of the froth selections.
5. Remove the milk container and always clean the steam
connection nozzle with a sponge.
Please note!
• To prepare a number of cappuccinos or milk based coffees,
clean the milk container after you have prepared the last
drink only.
• The milk container can be kept in the refrigerator.
• In some cases, to clean you must wait for the appliance to
heat up.
Programming the quantity of coffee and milk in the
cup for the CAPPUCCINO, LATTE, FLAT WHITE and HOT
MILK buttons
The appliance is set by default to automatically deliver
standard quantities.
To change these quantities, proceed as follows:
1. Place a cup under the coffee and milk spouts.
2. Press and hold the button corresponding to the drink you
want to programme until the message “PROGRAM MILK
Program quantity” is displayed.
3. Release the button.
The appliance starts delivering milk.
4. Once the required quantity of milk has been delivered into
the cup, press the button again.
5. The appliance stops delivering milk and after a few sec-
onds the coffee is delivered into the cup. “PROGRAM COF-
FEE Program quantity” is displayed.
6. Once the required quantity of coffee has been delivered
into the cup, press the button.
Coffee delivery stops.
The machine is now reprogrammed with the new quantities
of milk and coffee.
DELIVERING HOT WATER AND STEAM
Important! Danger of burns.
Never leave the machine unsupervised while delivering hot
water or steam.