DeLonghi ECAM23.42X, Инструкция по эксплуатации

Страница: 20 / 22

19
18. DISPLAYED MESSAGES
DISPLAYED MESSAGE POSSIBLE CAUSE SOLUTION
EMPTY GROUNDS CONTAINER The grounds container (A13) is full. Empty the grounds container and drip tray
(A17), clean and replace. Important: when
removing the drip tray, the grounds contai-
ner must be emptied, even if it contains few
grounds. If this is not done, when you make
the next coffees, the grounds container may fill
up more than expected and clog the machine.
FILL TANK Insufficient water in the tank (A9). Fill the tank with water and/or insert it correct-
ly, pushing it as far as it will go until it clicks
into place.
INSERT TANK The tank (A9) is not correctly in
place. Insert the tank correctly and press as far as it
will go.
INSERT GROUNDS CONTAINER After cleaning, the grounds contai-
ner has not been replaced (A13). Remove the drip tray (A17) and insert the
grounds container.
GROUND TOO FINE ADJUST MILL
alternating with
TURN STEAM DIAL The grinding is too fine and the
coffee is delivered too slowly or
not at all. Repeat coffee delivery and turn the grin-
ding adjustment dial (A2 - fig. 10) one click
clockwise towards «7» while the coffee mill is
in operation. If after making at least 2 coffees
delivery is still too slow, repeat the correction
procedure, turning the grinding adjustment
dial another click until delivery is correct (see
the section: «9.4 Adjusting the coffee mill». If
the problem persists, turn the steam dial to
the
I position and let some water run from the
cappuccino maker (A19).
If the water softener filter (C4) is
present, an air bubble may have
been released inside the circuit,
obstructing delivery. Deliver a little water by turning the steam dial
(A20) to the
I position until the flow is regular.
ADD PRE-GROUND COFFEE The «pre-ground coffee» function
has been selected without placing
any pre-ground coffee in the fun-
nel (A6). Place pre-ground coffee in the funnel or dese-
lect the “pre-ground” function.
DESCALE The machine must be descaled. The descaling procedure described in the «13.
Descaling» section needs to be performed as
soon as possible.
REDUCE COFFEE AMOUNT Too much coffee has been used. Select a milder taste or reduce the quantity
of pre-ground coffee, then make the coffee
again.