28
5. Turn the steam/hot water dial (A21) to the "I" position (fig.
6). The beverage buttons flash and water is delivered from
the cappuccino maker.
6. When delivery stops automatically, turn the steam dial
back to the "
O
" position.
The appliance goes off.
To use it, press the
button (B7) (fig. 7).
Please note:
• The first time you use the appliance, you need to make 4-5
cups of coffee before the appliance starts to give satisfac-
tory results.
• To enjoy your coffee even more and improve the perfor-
mance of your appliance, we recommend installing a water
softener filter (C4) as described in section “13. Water sof-
tener filter”. If your model is not provided with a filter, you
can request one from De'Longhi Customer Services.
7. TURNING THE APPLIANCE ON
Please note:
• Before turning the appliance on, make sure the main
switch (A6) on the back of the appliance is in the
I
position
(fig. 1).
• Make sure the steam/hot water dial (A21) is in the 0
position.
• Each time the appliance is turned on, it performs an auto-
matic preheat and rinse cycle which cannot be interrupted.
The appliance is ready for use only after completion of this
cycle.
Danger of burns!
During rinsing, a little hot water comes out of the coffee spouts
(A11) and is collected in the drip tray (A14) underneath. Take
care to avoid contact with splashes of hot water.
• To turn the appliance on, press the
button (B7) (fig.
7). The “coffee” buttons (B2), (B3), (B8) and (B9) flash on
the control panel (B) to indicate the appliance is heating
up.
While heating up, the machine performs a rinse cycle. As well
as heating the boiler, this also heats the internal circuits by cir-
culating hot water.
The appliance is at temperature when the coffee buttons on the
control panel remain on steadily.
8. TURNING THE APPLIANCE OFF
Whenever the coffee machine is turned off after being used to
make coffee, it performs an automatic rinse cycle.
Danger of burns!
During rinsing, a little hot water flows from the coffee spouts
(A11). Take care to avoid contact with splashes of hot water.
• To turn the appliance off, press the
button (B7) (fig.
7);
• if provided, the appliance performs a rinse cycle then goes
off (stand-by).
Please note!
If you will not be using the appliance for some time, unplug
from the mains socket:
• first turn the appliance off by pressing the
button;
• press the main switch (A6) to the “0” position.
Important!
Never press the main switch while the appliance is on.
9. SETTING WATER HARDNESS
For instructions on setting water hardness, see section “21. Set-
ting water hardness”
10. AUTO-OFF
The time can be changed so that the appliance switches off after
being idle for 15 or 30 minutes, or after 1, 2 or 3 hours.
To change the Auto-off setting, proceed as follows:
1. With the appliance off (standby) and the main switch (A6)
in the
I
position (fig. 1), press and hold the
/
button (B9) until the lights (B1) on the control panel come
on;
2. Select the required time interval by pressing the
but-
ton (B2):
15 min
30 min
1 hour
2 hours
3 hours
3. Press the
/
button (B9) to confirm. The lights
go off.
The auto-off time is now programmed.
11. ENERGY SAVING
Use this function to enable or disable energy saving. When ena-
bled, this mode reduces energy consumption in compliance with
current European regulations.
1. With the appliance off (standby) and the main switch (A6)
pressed (fig. 1), press and hold the
button (B4) until
the light on the control panel comes on;
2. To disable the function, press the
button (B2). The
light flashes;