DeLonghi ECAM22.360, Инструкция по эксплуатации

Страница: 12 / 20

11
which remains as set).
1. Press the
MENU button to enter the menu;
2. Press the or button until “Default values” is dis-
played;
3. Press the button;
4. The message “Confirm?” is now displayed.
5. Press the
button to confirm and exit.
Statistics function
This displays statistics relating to the machine. To display, pro-
ceed as follows:
1. Press the
MENU
button to enter the menu;
2. Press the or button until “Statistics” is dis-
played;
3. Press the button;
4. By pressing the or button you can check:
- how many coffees have been made;
- how many times the machine has been descaled;
- the total number of litres of water delivered;
- how many times the water filter has been replaced;
- how many cappuccinos and milk based drinks have been
made (CAPPUCCINO).
5. Press then the button twice to exit the menu.
MAKING COFFEE
Selecting the coffee taste
The appliance is set by default to make coffee with a standard
taste.
you can also choose one of these tastes:
Extra-mild taste
Mild taste
Standard taste
Strong taste
Extra-strong taste
To change the taste, press the button (fig. 7) repeat-
edly until the required taste is displayed.
Selecting the quantity of coffee in the cup
The appliance is set by default to automatically deliver the fol-
lowing quantities of coffee:
- short coffee (
≃
40ml) when the button is pressed;
- long coffee (
≃
120ml) when the button is pressed;
- two short coffees when the button is pressed;
- two long coffees when the button is pressed.
To change the quantity of coffee the appliance delivers auto-
matically into the cup, proceed as described below:
- press and hold the button corresponding to the quantity
to be modified until “Program quantity” is displayed, then
release the button;
- when the coffee in the cup reaches the required level, press
the same button again to memorise the new amount.
The machine is now reprogrammed with the new quantities.
Adjusting the coffee mill
The coffee mill is set by default to prepare coffee correctly and
should not require regulating initially.
However, if after making the first few coffees you find that the
coffee is either too weak and not creamy enough or delivery
is too slow (in drops), this can be corrected by adjusting the
grinding adjustment dial (fig. 8).
Please note :
The grinding adjustment dial must only be turned when the
coffee mill is in operation.
If the coffee is delivered too slowly or
not at all, turn one click clockwise.
For fuller bodied creamier coffee,
turn one click anticlockwise (do not
turn more than one click at a time
otherwise the coffee could be delive-
red in drops).
These adjustments will only be evident after at least 2 cups of
coffee have been delivered.
If this adjustment does not obtain the desired result, turn the
dial another click.
Tips for a hotter coffee
For hotter coffee, you should:
• before delivering the coffee, perform a rinse cycle by
pressing the button. Hot water is delivered from the
spout, heating the internal circuits of the appliance and
thus raising the coffee temperature.
• warm the cups by rinsing them with hot water (using the
hot water function);
• increase the coffee temperature in the settings menu
(page 10).
Making coffee using coffee beans
Important!
Do not use caramelised or candied coffee beans as they could
stick to the coffee mill and damage it.
1. Fill the container with coffee beans (fig. 9).
2. Place under the coffee spouts:
- 1 cup, if you want 1 coffee (fig. 10);
- 2 cups, if you want 2 coffees (fig. 11).
3. Lower the spouts as near as possible to the cup. This makes
a creamier coffee (fig. 12).
4. Press the button corresponding to the required coffee.