DeLonghi ECAM21.11X, Инструкция по эксплуатации

Страница: 17 / 20

16
The appliance complies with the following EC
directives:
• Low Voltage Directive 2006/95/EC and subsequent amendments;
• EMC Directive 2004/108/EC and subsequent amendments;
• European Stand-by Regulation 1275/2008;
• Materials and accessories coming into contact with food conform
to EC regulation 1935/2004.
DISPOSAL
In compliance with European directive
2002/96/EC, the appliance must not be
disposed of with household waste, but
taken to an authorised waste separation and
recycling centre.
EXPLANATION OF LIGHTS
LIGHT POSSIBLE CAUSE REMEDY
FLASHING
Insufficient water in the tank. Fill the tank with water and insert it correctly,
pushing it as far as it will go until it clicks into
place.
The tank is not correctly in place. Insert the tank correctly and press as far as it
will go.
FLASHING
The grounds container (A13) is full. Empty the grounds container and drip tray,
clean and replace. Important: when removing
the drip tray, the grounds container MUST be
emptied, even if it contains few grounds. If this
is not done, when you make the next coffees,
the grounds container may fill up more than
expected and clog the machine.
After cleaning, the grounds contai-
ner has not been replaced. Remove the drip tray and insert the grounds
container.
FLASHING
The grinding is too fine and the
coffee is delivered too slowly or
not at all. Repeat coffee delivery and turn the grin-
ding adjustment dial (fig. 11) one click
clockwise towards “7” while the coffee mill is
in operation. If after making at least 2 coffees
delivery is still too slow, repeat the correction
procedure, turning the grinding adjustment
dial another click until delivery is correct (see
the section: Adjusting the coffee mill on page
11). If the problem persists, turn the steam
dial to the I position and deliver water from the
cappuccino maker.
FLASHING
The "pre-ground coffee" function
has been selected without pla-
cing any pre-ground coffee in the
funnel. Place pre-ground coffee in the funnel or dese-
lect the "pre-ground" function.