EC155M
CLEANING and MAINTENANCE: FROTHER
CLEANING and MAINTENANCE: FILTER
Remove steel filter cup from
the steel filter holder.
1
5A
Unscrew cap from the
steel filter cup.
Remove gasket from the
steel filter cup.
3
2
4
Remove the filter from the
the gasket.
5
6
7
8
Replace the
filter and plastic
disk into the
gasket. Make
sure to insert
the pin on the
plastic disk
into the hole in
the gasket.
Remove the stainless-steel
filter off the plastic disc.
Clean steel filter with a brush
and the holes with a needle.
Replace the
assembly in the
steel filter cup,
making sure the
pin is inserted in
the hole in the
support. Finally,
screw on the
cap.
Note: If the filter is not cleaned and assembled properly, it could effect the crema
of the espresso. The filter assembly must be cleaned (every 200 coffees.)
10
11
Unscrew the frother by rotating
clockwise and pulling downwards.
3
4
5
Frother and steam nozzle parts can be cleaned thoroughly by using
De’Longhi Milk Clean
.
Clean frother with warm
running water and use a
needle to clean the two holes.
Clean the inside of frother
with warm water and use
a needle to clean the
center hole.
1
2
Thoroughly clean steam nozzle with cloth
and warm water.
Replace the frother by
inserting and rotating
counterclockwise.
