
45
would recommend the whole area is
cleaned. NOTE: Please ensure the
slots/castlellations are kept free of any
material/cleaner.
DO NOT PUT BURNER BODIES
INTO A DISHWASHER AS THIS
MAY TURN THEM BLACK.
•
Inside of oven:
The oven should
always be cleaned after use when it
has cooled down. The cavity should be
cleaned using a mild detergent solution
and warm water. Suitable proprietary
chemical cleaners may be used only
on enamel after first consulting the
instructions supplied with the oven
cleaner and testing a small sample
on the oven cavity. Abrasive cleaning
agents or scouring pads/cloths should
not be used on the cavity surface.
NOTE: The manufacturers of this
appliance will accept no responsibility
for damage caused by chemical or
abrasive cleaning.
Let the oven cool down and pay
special attention not to touch the
hot heating elements inside the
oven cavity.
• Electronic programmer display
cleaning
Clean the programmer display using
a soft cloth, warm water and neutral
soap, or a soft cloth with a liquid
detergent (non-abrasive). When
cleaning, be careful to move the cloth
in one direction only. Then wipe the
display with a damp cloth and dry it
with a soft cloth.
IMPORTANT: DO NOT use chlorine-
based or acid-based cleaning
products, abrasive products or
non-neutral detergents as they may
cause irreparable damage to the
surface. DO NOT spray cleaning
liquids directly on the programmer
display.