DeLonghi DRAGON 4, Инструкция по эксплуатации

Страница: 6 / 7

5
DESCRIPTION
A
Thermostat
B Power selector
C/D/E
Power indicator lights
(
MIN, MED, MAX)
F Timer
G
Cord holder
H Wheel
USE
"Easy wheel" system
Turn the radiator upside down on a rug or soft surface to prevent
damaging the paint finish. Fully unfold the wheels by turning
them outwards (Fig. 1). Turn the radiator back to its upright
position.
Caution
Always operate the heater in upright position only (wheels on
the bottom, controls on top).
Any other position could create a hazardous situation.
Connection
- Before using the appliance check that your supply voltage
is the same of that shown on the rating label of the
unit and that the power socket and power supply line
correspond to the load specified.
- Check also the current capacity of your fuses. CONNECT
YOUR HEATER TO EARTH PROVIDED SOCKET ONLY.
Keep loose clothing or bedding, furniture and flammable
material away from the heater's wall outlet.
Turning on
Insert the plug into an electrical outlet, rotate the thermostat
knob to maximum and turn the unit on as follows using the
power selector:
- Turn the power selector to position MIN to select minimum
output (the min light will be on).
- Turn the power selector to position MED to select medium
output (the min/med light will be on).
- Turn the power selector to position MAX to select maximum
output (the lights will be on).
Adjusting the thermostat
When the room has reached the desired temperature, turn the
thermostat knob slowly in an anti-clockwise direction until you
hear a "click" and not beyond it. The thermostat will then adjust
the set temperature automatically and keep it constant.
If your unit is a three-output version, in intermediate seasons
or on days when temperatures are not particularly cold, select
minimum output to optimize savings and consumption.
Antifreeze function
Turn the thermostat dial to the position and the power
selector to position MAX. The appliance will maintain a minimum
room temperature of approximately 5°C, thus preventing
freezing while conserving energy. In models that come with a
timer, tabs must be set in the inward position.
Reminder
To completely shut the appliance off, turn the power selector to
the "0" position and then unplug the appliance from the outlet.
UNITS WITH TIMER
How to use the timer
To program heating, proceed as follows:
- Look at the time on your clock or watch. If it is 10 p.m.,
turn the numbered timer disk clockwise until the number
22 (10 p.m.) on the disk coincides with the pointer
s
( 3 )
on the timer. Set the periods of time when you want the
appliance to work by pushing the teeth (
1 ) inward. Each
tooth (
1
) corresponds to a period of 15 minutes.
This will leave visible sectors which correspond to the
periods of operation (
2
). When set, the radiator will operate
automatically each day during the times programmed
(important: the radiator must always be plugged into the
socket).
- To change the programming, move the teeth back into the
initial position and set the new periods of operation.
- To turn the appliance off completely, as well as turning the
knob to the off position, you must also unplug it from the
power outlet to avoid continued operation of the timer.
IMPORTANT: DO NOT ROTATE CLOCK DIAL COUNTER-
CLOCKWISE.
The timer is like an electric clock, and will only work when